Beyerdynamic TGV96c Microphone
Every comparison needs a reference – data, specifications, properties that can be measured against. For the vocal microphones of the Touring Gear series, the TG V96c true condenser microphone – the benchmark for live vocals assumes this role. The strength of the TG V96c lies in its absolutely faithful reproduction – even of the finest nuances and on stage every detail counts. The microphone’s exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what’s inside that makes the TG V96c into a topclass microphone and makes it stand out with vocalists, professional rental companies and sound technicians: this real condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and nobtrusive sound pattern. Further advantages: the TG V96c can be operated with phantom powering down to 11V without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation. The TG V96c is rugged enough for the stage and is supplied with an individual frequency response curve print out. Handcrafted in Germany.
Product Features
- Absolutely faithful reproduction
- Polar pattern: Cardioid
- Linear frequency response
- Optimal sound due to multi-layer metal gauze on the upper grill
- Protects the diaphragm with sintered, acoustically neutral bronze
- Microphone frequency response: 20 – 20.000 Hz
Product Specifications
- Transducer type: Condenser
- Operating principle: Pressure gradient
- Polar pattern: Cardioid
- Frequency response
- Close miking: 20 – 20,000 Hz
- Distant miking (measured at 1 m): 55 – 20,000 Hz
- Open circuit voltage: 4 mV/Pa (-48 dBV) ±2 dB
- Nominal impedance: 60 Ω
- Load impedance: ≥ 1 kΩ
- Max. SPL at 1 kHz: 150 dB
- Signal-to-noise ratio: 64 dB [CCIR, Q-Peak]
- Equivalent SPL: 20 dB [A, RMS]
- In-phase rejection 50 – 20,000 Hz: ≥ 60 dB
- Power supply: Phantom power: 24 – 48 V (recommended: 48 V)
- Current consumption: 4.3 mA
- Connection: 3-pin male XLR,
- 1 = ground
- 2 = +
- 3 = –
Physical & Dimensions
- Length: 185mm
- Shaft diameter: 26mm
- Head diameter: 48mm
- Weight: 330g